CEMS 2016:The 2016 International Conference on
Chemical Engineering and Materials Science

* Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations.

* Authors will be informed about the title of the Journal before their registration. 

* Contact us by email: support@inase.org   Registration fees       Publication Ethics and Malpractice Statement     Deadlines
 (Previous Conference: CEMS 2015, March 15-17, 2015, Vienna, Austria)

CONFERENCE PROGRAM

Papers must be written in the correct format:  MS Word.doc  or LaTeX  or LaTeX2   and must be uploaded using the following form as .doc, or .pdf file. Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations. Only full papers will be promoted to reviewers for thorough peer review. For the review process only active scholars with many recent publications in ISI and/or SCOPUS will be used.  We do not accept papers any longer.

• Prof. Aida Bulucea, University of Craiova, Romania
• Prof. Zoran Bojkovic, Univ. of Belgrade, Serbia
• Prof. Metin Demiralp, Istanbul Technical University, Turkey
• Prof. Imre Rudas, Obuda University, Budapest, Hungary

• Prof. Gang-Yu Liu, University of California, Davis Campus, CA, USA
• Prof. Zhibing Zhang, University of Birmingham, Birmingham, UK
• Prof. Jean-Francois Gohy, Université catholique de Louvain, Belgium
• Prof. Waler Caseri, ETH, Zurich, Switzerland
• Prof. Jacques Desbrieres, Universite De Pau Et Des Pays De L'Adour, France
• Prof. Adrian Schumpe, Technical University of Braunschweig, Germany
• Prof. Chris Bowen, University of Bath, Bath, UK
• Prof. Jerzy Baldyga, Technical Univeristy Warszawska, Poland
• Prof. Alirio Rodrigues, University of Porto, Portugal
• Prof. Mostafa Barigou, University of Birmingham, Birmingham, UK
• Prof. Jaime Wisniak, Ben-Gurion University of the Negev, Beer-Sheva, Israel
• Prof. Sohail Murad, University of Illinois at Chicago, USA
• Prof. Konstantinos E. Kakosimos, Texas A&M University at Qatar, Doha, Qatar
• Prof. Raghunath V. Chaudhari, University of Kansas, USA
• Prof. Xijun Hu, The Hong Kong University of Science and Technology, Kowloon, Hong Kong
• Prof. Deepak Kunzru, Indian Institute of Technology, Kanpur, India
• Prof. Amit Bandyopadhyay, AAAS Fellow , ASM International Fellow , AIMBE Fellow and ACerS Fellow, Washington State University, Pullman, State of Washington, USA
• Prof. Yong Ding, Georgia Institute of Technology, Atlanta, GA, USA
• Prof. Yulin Deng, Georgia Institute of Technology, Atlanta, GA, USA
• Prof. Paul H. Holloway, Distinguished Prof., University of Florida, Gainesville FL, USA
• Prof. Saad Khan, North Carolina State University, Raleigh, North Carolina, USA
• Prof. Manijeh Razeghi, Northwestern University, Evanston, IL, USA
• Prof. Igor Sevostianov, New Mexico State University, Las Cruces, New Mexico, USA
• Prof. Mohindar S. Seehra, West Virginia University, Morgantown, West Virginia, USA
• Prof. Tao Liu, Florida State University, Tallahassee, Florida, USA
• Prof. Daniel Guay, Institut National de la Recherche Scientifique (INRS), Universite du Quebec,Quebec, Canada
• Prof. Tian Tang, University of Alberta, Edmonton, Alberta, Canada
• Prof. Roland Frankenberger, University of Marburg, Marburg, Germany
• Prof. Mohamedally Kurmoo, Universite de Strasbourg, Strasbourg, France
• Prof. C. C. Sorrell, University of New South Wales, Sydney, NSW, Australia
• Prof. Concepcion Lopez, Universitat de Barcelona, Barcelona, Spain
• Prof. Alan Dalton, University of Surrey, Guildford, Surrey, UK
• Prof. Kourosh Kalantar-Zadeh, RMIT University, Melbourne, Australia
• Prof. Constantinos Tsitsilianis, University of Patras, Patras, Greece
• Prof. Tetsu Yonezawa, Hokkaido University, Kita Ward, Sapporo, Hokkaido Prefecture, Japan
• Prof. Daolun Chen, Ryerson University, Toronto, Ontario, Canada
• Prof. Mohamed M. Chehimi, Universite Paris Diderot, Paris, France
• Prof. Vincenzo Fiorentini, Universita degli studi di Cagliari, Cagliari, Italy
• Prof. Tamas Ungar, Eotvos Lorand University (ELTE), Budapest, Hungary
• Prof. Anthony W. Coleman, Universite Claude Bernard Lyon 1, Lyon, France
• Prof. Albert Chin, IEEE Fellow, OSA Fellow, National Chiao Tung University, Hsinchu, Taiwan
• Prof. Artur Cavaco-Paulo, Universidade do Minho, Braga, Portugal
• Prof. Yoshihiro Tomita, Kobe University, Kobe, Japan
• Prof. Jian Wang, Los Alamos National Laboratory, Los Alamos, NM, USA
• Prof. Byung K. Kim, Pusan National University, Busan, South Korea
• Prof. John T. Sheridan, University College Dublin, Belfield, Dublin, Ireland
• Prof. Chi-Wai Chow, National Chiao Tung University, Hsinchu, Taiwan
• Prof. Christian M. Julien, Universite Paris-6, Paris, France
• Prof. Chun-Hway Hsueh, National Taiwan University, Taipei, Taiwan
• Prof. Hyung-Ho Park, Yonsei University, Seodaemun-gu, Seoul, Korea
• Prof. Victor M. Castano, Universidad Nacional Autonoma de Mexico, Mexioc City, Mexico
• Prof. Peter Chang, University of Saskatchewan, Saskatoon, Saskatchewan, Canada
• Prof. Dean-Mo Liu, National Chiao Tung University, HsinChu, Taiwan
• Prof. Rui Vilar, Instituto Superior Tecnico, Lisboa, Portugal
• Prof. Hugh J. Byrne, Dublin Institute of Technology, Dublin, Ireland
• Prof. Won-Chun Oh, Hanseo University, Seosan-si, Chungcheongnam-do, South Korea
• Prof. Yuanhua Lin, Tsinghua University, Haidian, Beijing, China
• Prof. S.C. Tjong, City University of Hong Kong, Sham Shui Po District,New Kowloon, Hong Kong
• Prof. Huan-Tsung Chang, National Taiwan University, Taipei City, Taiwan
• Prof. Yoshitake Masuda, National Institute of Advanced Industrial Science and Technology (AIST), Tokyo, Japan
• Prof. Jing Zhang, Donghua University, Shanghai, China
• Prof. Veronica Cortes de Zea Bermudez, Universidade de Tras-os-Montes e Alto Douro, Vila Real, Portugal
• Prof. Jun Zhang, Inner Mongolia University, Hohhot, Inner Mongolia, China
• Prof. Israel Felner, Hebrew University of Jerusalem, Jerusalem, Israel
• Prof. Sukhvinder Badwal, CSIRO Energy Technology, Australia
• Prof. Te-Hua Fang, National Kaohsiung University of Applied Sciences (KUAS), Kaohsiung, Taiwan
• Prof. Belkheir Hammouti, Mohammed Premier University, Oujda, Morocco
• Prof. Mohd Sapuan Salit, Universiti Putra Malaysia, Selangor, Malaysia
• Prof. Kwansoo Chung, Seoul National University, Seoul, South Korea
• Prof. Zhongfang Chen, University of Puerto Rico, San Juan, Puerto Rico
• Prof. Soon-Ku Hong, Chungnam National University, Daejeon, South Korea
• Prof. Hannes Jonsson, University of Iceland, Reykjavik, Iceland
• Prof. Byron Gates, Simon Fraser University, 8888 University Drive, Burnaby, B.C., Canada
• Prof. Culea Eugen, Technical University of Cluj-Napoca, Cluj-Napoca, Romania
• Prof. Vesselin Dimitrov, University of Chemical Technology and Metallurgy, Sofia, Bulgaria
• Prof. Shadpour Mallakpour, Isfahan University of Technology, Isfahan, Iran
• Dr. Stergios Pispas, National Hellenic Research Foundation (NHRF), Athens, Greece
• Dr. Anna Lukowiak, Polish Academy of Science, Wroclaw, Poland
• Dr. Dimitris Tsiourvas, NCSR "Demokritos", IAMPPNM, Dept. of Physical Chemistry, 15310 Aghia Paraskevi, Attiki, Greece.

CHEMICAL ENGINEERING: Reaction engineering, catalysis and kinetics, Distillation and absorption, Extraction and leaching, Membrane separations, Adsorption and ion exchange, Filtration, sedimentation, centrifugation, hydrocyclons, Phase equilibrium and fluid properties, Fluid flow and multiphase systems, Mixing, Fluidization, Heat transfer processes and equipment, Drying and evaporation, Computer aided process engineering, Particulate solids, Pharmaceutical engineering, Environmental engineering, Electrochemical engineering, Safety in chemical industry, Supercritical fluid applications, Thermodynamics and transport properties, Food processing and technology, Micro- and mesoporous materials, Biotechnology, Process intensification and miniaturisation, Electromembrane processes and integrated membrane systems, Analytical Chemistry, Advanced materials processing, Biochemical and bio-molecular engineering, Bioengineering and biomedical engineering, Biological and Medicinal Chemistry, Biotechnology, Catalysis, Chemical Education, Chemical engineering education, Chemical reaction engineering, Chemical engineering equipment design and process design, Economics and Business Management, Environment, Inorganic Chemistry, Macromolecular Science and Engineering, Materials Chemistry, Organic Chemistry, Physical, Theoretical and Computational Chemistry, Process Safety Management, Rubber, Surface Science, Systems and Control, Green Chemistry Forum, Energy and environment, Food process technology and engineering, Forest product processing, Milk product processing, Industrial collaboration, Industrial drying, Mining and metals, Nanomaterials, Particle technology, Process system, instrumentation and control, Product engineering and product development, Separation and purification, Transport phenomena (heat, mass transfer and fluid flows), Mathematical modeling in chemical engineering, Chemical engineering education, Others....

MATERIAL SCIENCE: Inorganic Materials, Metallic Materials, Organic Materials, Composite Materials, Polymer Materials, Biomaterials, Nanomaterials, Macroscopic Properties of Materials, Failure Analysis, Strength of Materials, Condensed Matter Physics, Materials Physics, Ceramography, Crystallography, Electronic and Magnetic Materials, Semiconductors, Thin Films, Refractory Materials, Functionally Graded Materials, Materials in Industry, Ceramics and Glasses, Metal Alloys, Forensic Materials Engineering, Metallography, Metallurgy, Microtechnology, Nanotechnology, Rheology, Surface Science/Catalysis, Textile Reinforced Materials, Tribology, Others